Before Procedure Measurements:
- Flaccid girth 4.5 to 5.75 inches. This measurement ranged or varied greatly due to a prior fat transfer procedure, which resulted in great asymmetries. The patient’s goal was to enlarge and ‘even out’ the shaft – the base being way too large in comparison to the upper shaft area. His base or lower shaft flaccid girth measured 5.75 and the upper shaft measured 4.5 inches.
- Flaccid length was 3.25 inches.
The patient had one procedure performed.
After Procedure Measurements:
- Flaccid girth is approximately 5.5 to 6.0 inches. At the base is now 6.0 – 6.25 inches, the upper shaft measured at 5.75 – 6.0 inches, an increase (range) of approximately ½ to 1.5 inches.
- Flaccid length is 4.25 inches, an increase of approximately 1 inch.
The patient plans on having a second treatment to reach his goal of 2.5 – 3.0 inch increase in circumference or girth but to be distributed evenly. Erection photos are not taken, however, the erection girth measurements closely parallel what the flaccid girth change was after the first or second male enhancement procedure.
![](https://loriamedical.com/wp-content/uploads/2024/06/image-9.png)
Before & After